{"title":"Excavator Accessories","description":"\u003cspan data-mce-fragment=\"1\"\u003eWe stock a variety of convenient accessories for your excavator to help you stay productive and comfortable.  Take a look at our selection to see if we have what you need.  If you don't find it, give us a call!\u003c\/span\u003e","products":[{"product_id":"12-volt-cab-heater","title":"12 Volt Cab Heater | Skid Steer UTV Tractor","description":"\u003ch2\u003e12 Volt Cab Heater and Fan for Compact Equipment\u003c\/h2\u003e\n\u003cp\u003eThis compact ceramic heater is intended for 12-volt skid steers, excavators, UTVs, and compact tractors. It connects directly to the machine battery and delivers 300 watts of heat. Switch to fan mode when you want air movement without heat, then aim the airflow with the swivel base.\u003c\/p\u003e\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e12-volt ceramic heater and fan with swivel base\u003c\/li\u003e\n  \u003cli\u003e15-foot, 12-gauge power cord with ring terminals\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical and size specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eElectrical connection: direct to a 12-volt battery\u003c\/li\u003e\n  \u003cli\u003eHeater output: 300 watts\u003c\/li\u003e\n  \u003cli\u003eCircuit protection: install a 30-amp inline fuse on the red positive wire, or use a vehicle fuse-panel connection capable of 30 amps, following the owner's guide and the machine manufacturer's requirements\u003c\/li\u003e\n  \u003cli\u003eDimensions: 6 x 8 x 6 inches\u003c\/li\u003e\n  \u003cli\u003eProduct weight: 2.95 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck your machine before ordering\u003c\/h3\u003e\n\u003cp\u003eConfirm that your machine has a 12-volt electrical system, a suitable mounting location, a protected cable route, and the required circuit capacity. The heater uses a direct battery connection; it does not plug into a dashboard accessory socket. Use it only while the machine is running to avoid draining the battery, and treat it as supplemental heat rather than a replacement for the machine's primary heater.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich machines is this heater sold for?\u003c\/strong\u003e\u003cbr\u003eIt is sold for 12-volt skid steers, excavators, UTVs, and compact tractors. Confirm the electrical system and mounting space on your machine before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the fan without heat?\u003c\/strong\u003e\u003cbr\u003eYes. The unit has heat and fan modes with adjustable fan speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003cbr\u003eThe included 15-foot, 12-gauge cord connects directly to the battery with ring terminals. The owner's guide requires a 30-amp inline fuse on the positive wire, or a 30-amp-capable vehicle fuse-panel connection.\u003c\/p\u003e\n\u003cp\u003eWorking on cab visibility too? See the \u003ca href=\"\/en-ca\/products\/electric-wiper-kit\"\u003eelectric wiper kit\u003c\/a\u003e and \u003ca href=\"\/en-ca\/products\/skid-steer-backup-camera\"\u003eCM-40 wired backup camera\u003c\/a\u003e.\u003c\/p\u003e","brand":"SkidSteerCabs.com","offers":[{"title":"Default Title","offer_id":13819868743,"sku":"DAS-RP12V","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/12-Volt-Cab-Heater-Skid-Steer-UTV-Tractor.jpg?v=1743637899"},{"product_id":"electric-wiper-kit","title":"Electric Wiper Kit | For Skid Steer Excavator SXS","description":"\u003ch2\u003e12-Volt Electric Wiper Kit for Polycarbonate Cab Doors\u003c\/h2\u003e\n\u003cp\u003eKeep a working view through an SSC cab door with a compact electric wiper package built around a 12-volt motor, adjustable arm, and right-parking sweep. The kit was developed for polycarbonate skid steer enclosure doors and can also suit compatible excavator, tractor, and side-by-side panels when the mounting surface and electrical system match.\u003c\/p\u003e\n\u003cp\u003eThis is not a direct OEM wiper-motor replacement. Factory glass, splined shafts, bolt patterns, and wiring can differ even when the finished wiper looks similar. Measure the panel and compare the mounting layout before drilling.\u003c\/p\u003e\n\u003ch3\u003eWiper dimensions and sweep\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1-1\/2-inch motor shaft for standard and thicker forestry-style polycarbonate doors.\u003c\/li\u003e\n\u003cli\u003e55-degree wiper angle.\u003c\/li\u003e\n\u003cli\u003e13-3\/4-inch wiper blade.\u003c\/li\u003e\n\u003cli\u003eAdjustable arm from 11 to 15 inches.\u003c\/li\u003e\n\u003cli\u003eApproximate adjustable sweep from 21 to 24 inches.\u003c\/li\u003e\n\u003cli\u003eRight-parking action that stops the blade away from the normal sight line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore mounting, hold the arm and blade against the intended location through the full 55-degree arc. Does the blade stay on the clear panel? Will it clear the door frame, handle, and seal? Is the parked blade outside the operator's main view? Establish the motor location from those checks rather than drilling from a generic diagram.\u003c\/p\u003e\n\u003ch3\u003eMotor, switch, and wiring\u003c\/h3\u003e\n\u003cp\u003eThe toggle switch sits on the back of the motor where the operator can reach it. A six-foot lead with an integrated fuse and holder runs toward the cab power source, and plastic wrap protects the wire. The motor housing is made for wet cab-door use.\u003c\/p\u003e\n\u003cp\u003eConfirm a suitable 12-volt circuit, fuse placement, grounding, and wire route before connection. Leave enough slack for door movement, then secure the wire away from hinges, latches, sharp edges, and operator controls.\u003c\/p\u003e\n\u003ch3\u003eFit check before ordering\u003c\/h3\u003e\n\u003cp\u003eSSC normally uses this kit with its polycarbonate enclosure doors. One documented Mustang 940 question was directed back to the dealer because the factory glass system used a different motor and bolt pattern. If the machine still has an OEM glass door or an unknown aftermarket panel, send the door thickness, existing hole pattern, and photos through our \u003ca href=\"\/en-ca\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBrowse other \u003ca href=\"\/en-ca\/collections\/skid-steer-accessories\"\u003eskid steer cab accessories\u003c\/a\u003e when the enclosure also needs lighting, heat, or rear visibility.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWill this replace any factory wiper motor?\u003c\/h4\u003e\n\u003cp\u003eNo. It is an aftermarket kit for compatible polycarbonate doors, not a universal OEM replacement.\u003c\/p\u003e\n\u003ch4\u003eHow long is the blade?\u003c\/h4\u003e\n\u003cp\u003eThe supplied blade is 13-3\/4 inches long, with an arm adjustable from 11 to 15 inches.\u003c\/p\u003e\n\u003ch4\u003eWhere is the switch?\u003c\/h4\u003e\n\u003cp\u003eThe on\/off toggle is located on the operator-facing back of the motor.\u003c\/p\u003e","brand":"SkidSteerCabs.com","offers":[{"title":"Default Title","offer_id":13888815751,"sku":"DT-W1-35","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/files\/Electric-Wiper-Kit-For-Skid-Steer-Excavator-SXS.jpg?v=1743637918"},{"product_id":"skid-steer-backup-camera","title":"CM-40 Skid Steer Backup Camera | Eterra","description":"\u003ch2\u003eEterra CM-40 Backup Camera for Skid Steers, Tractors, and Compact Equipment\u003c\/h2\u003e\n\u003cp\u003eThe Eterra CM-40 is a wired backup camera system for skid steers, tractors, excavators, UTVs, and other compact equipment that need a clear rear view during work. The camera mounts to the machine and sends a live feed to a 7-inch color monitor in the cab.\u003c\/p\u003e\n\u003cp\u003eThe kit is built for worksite use, with a heated camera, waterproof heavy cast aluminum camera housing, sealed locking cable connections, and a water- and impact-resistant monitor enclosure. Unlike automotive backup cameras, the CM-40 is designed to stay on while the machine is operating.\u003c\/p\u003e\n\u003ch3\u003eMounting and Add-On Options\u003c\/h3\u003e\n\u003cp\u003eThe standard CM-40 kit includes a regular mounting bracket. For compatible roll-up-door cab installations, we also offer the \u003ca href=\"\/en-ca\/products\/cm-40-camera-mounting-bracket-for-kubota-eterra\"\u003eCM-40 Kubota\/Takeuchi mounting bracket\u003c\/a\u003e, sold separately. For longer monitor-to-camera runs, add the \u003ca href=\"\/en-ca\/products\/cm-40-15-foot-video-cable\"\u003eCM-40 15-foot video extension cable\u003c\/a\u003e. For another viewing angle, add the \u003ca href=\"\/en-ca\/products\/back-up-camera\"\u003eadditional CM-40 backup camera\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7-inch TFT color monitor in a water- and impact-resistant housing.\u003c\/li\u003e\n\u003cli\u003eTwo-channel capability with manual or auto-switching.\u003c\/li\u003e\n\u003cli\u003eHeated camera in a heavy cast aluminum waterproof housing.\u003c\/li\u003e\n\u003cli\u003eCCD camera with 420 TVL resolution, infrared lighting, audio, and a 150-degree viewing angle.\u003c\/li\u003e\n\u003cli\u003e5-meter camera-to-monitor extension cable included with the kit.\u003c\/li\u003e\n\u003cli\u003eMagnetic camera mount with neodymium magnets that will not leave rust marks on the machine.\u003c\/li\u003e\n\u003cli\u003eNight-vision support for low-light work areas.\u003c\/li\u003e\n\u003cli\u003eWired camera connection with filter to reduce signal interference compared with wireless camera systems.\u003c\/li\u003e\n\u003cli\u003eRobust aluminum U-shaped mounting system and heavy cabling with sealed locking connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting note:\u003c\/strong\u003e The monitor is heavier than small automotive-style displays. Overhead mounting should only be used when it can be bolted to a steel surface.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Equipment Use\u003c\/h3\u003e\n\u003cp\u003eAutomotive backup cameras are usually designed for short reverse-only use. The CM-40 is built for compact equipment operators who want a camera view available throughout the workday, with a wired connection and rugged housings\/cabling for vibration, weather, and daily machine use.\u003c\/p\u003e\n\u003ch3\u003eSee the CM-40 Backup Camera in Action\u003c\/h3\u003e\n\u003cp\u003eWatch the demo video below to see the CM-40 camera system in use, including low-light operation.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"Eterra CM-40 backup camera demo video\" src=\"https:\/\/www.youtube.com\/embed\/xjvPqUNzXpc\" height=\"444\" width=\"500\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Eterra","offers":[{"title":"Default Title","offer_id":42469625266415,"sku":"ET-CM-40","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/CM-40-Skid-Steer-Backup-Camera-Eterra.jpg?v=1754783496"},{"product_id":"12-volt-cab-heater-water-sourced-heat","title":"ETerra 12 Volt Cab Heater (water sourced heat)","description":"\u003ch2\u003e\u003cspan\u003e\u003cspan\u003e12 Volt Cab Heater - Fits all models - 12 Volt Only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Eterra Maradyne Cab Heater uses your existing cooling system to draw heat. Our price includes the heater and 3 Speed switch kit with minimal wiring. An installation kit is sold separately which includes the hosing required and the common fittings used to install. Please check your block as our kit utilizes SAE threaded fittings, while many blocks use metric threads. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease note that you are responsible for all wiring in your skid steer, this will include a hot\/fused lead from your battery to the switch. You are then required to properly ground the base of the heater to insure a complete circuit to the fan motor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou need to have some mechanical expertise to do this and we want you to understand that this will take you about 5 hours to install. There is no easy way to do this. You will need an open spot on the floor to mount the heater. You will then have to break into the cooling system and run the lines that you will supply to the sides of the heater. You have to allow for the extra length when you lift the cab up. Keep your eye on the prize because once you are done, you will be in a toasty cab as you plow the winter roads! Some may find it easier to have installation completed at a shop or dealer.\u003c\/p\u003e\n\u003cp\u003eWe were going to offer the electric model but it is 1\/10th the output and feedback from the field has been poor, so unfortunately if you want heat, you are going to have to work for it.\u003ca name=\"CLICK%20HERE\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: The tube and fin water coil have a lifetime mfg. warranty, please contact us for details\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eImportant NOTICE: This heater is NOT for use on oil cooled units! This item is only designed for water cooled equipment. Please check your cooling system requirements prior to ordering.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eterra","offers":[{"title":"Default Title","offer_id":13893564359,"sku":"MD-HDM-5030-12V","price":298.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/ETerra-12-Volt-Cab-Heater-water-sourced-heat.jpg?v=1683676477"},{"product_id":"eterra-cab-heater-installation-kit","title":"ETerra Cab Heater Installation Kit","description":"\u003ch2\u003e\u003cspan\u003e\u003cspan\u003eEterra Cab Heater Installation Kit:\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eSave the needless time spent shopping around for the correct fittings and hoses to go with your Eterra Cab Heater. You are already in good hands and Skid Steer Solutions has the hosing and fittings available and ready to ship with your heater at already very competitive pricing.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis SAE dimensioned kit allows you to connect the heater hose supplied in the kit (sized for a typical installation), directly into your block and run a supply line to and from your heater.  There are two of the most common sizes of fittings supplied which covers about 90% of the machines available.  Please note that this kit does not work with metric threaded blocks so please do check your machine before purchasing.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Eterra","offers":[{"title":"Default Title","offer_id":13893618759,"sku":"MD-TA8000689","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/ETerra-Cab-Heater-Installation-Kit.jpg?v=1683676479"},{"product_id":"ez-lock-ditigal-remote-anti-theft-system","title":"EZ-Lock Digital Remote Anti-Theft System","description":"\u003ch2\u003e\u003cspan\u003e\u003cspan\u003eEZ-Lock Digital Remote Plug \u0026amp; Play Anti-Theft System\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWe work with some pretty smart people that try to come up with ways to create items that are helpful for our customers.  Well, this is one of those incredible products.  The EZ-Lock System 1 is simple, effective and inexpensive.\u003cbr\u003e\u003cbr\u003eWe do not want to give too much away to competitors or thieves so we will not give out the technical details, but what we will tell you is this.  We have a simple product that takes about 10 minutes to install.  Once installed it will control either your fuel or starting circuit. It contains a digital proximity circuit that requires you to have the FOB within 10 - 30 feet of the control detector. If you are within this range, the circuit can be activated, and allow the machine to be started. If no code is sent, when the key is turned the machine will not start. The base product ships with 3 simple to use control devices. 2 single button and 1 wireless 4 digit PIN pad. The machine operator needs to send the authorization code to start the machine. If you forget, loose, or break the personal FOB's, we have another solution. Your wireless PIN pad is mounted inside the machine. Simply enter the 4 digit code and the machine will be ready to operate.  Never have to worry about down time due to a lost or broken fob. Control 1 machine or hundreds!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHere are the features short and sweet!\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMost machines require just a plug in installation\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInexpensive with no monthly monitoring fees.  Cheaper by the dozen so contact us for bulk orders and programming.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWill not allow your machine to be started if the FOB is not within 10 - 30 feet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorks on one machine or several.  You can easily control an entire fleet with the same FOB.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMillions of digital codes make sure the system cannot be cracked\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 Types of control FOB's available\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4 digit PIN device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOne touch remote\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHigh Tech and trouble free\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan\u003eOnly \u003cspan\u003eYOUR\u003c\/span\u003e operators can start \u003cspan\u003eYOUR\u003c\/span\u003e machine\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eWe know this product is a winner.  We stand behind it like we do all of the items we sell.  We are so sure you will be thrilled with this item that we offer a 100% money back guarantee.  We will even pay the shipping.  If you do not like it or it does not do what we promise, we will take it back and even pay the freight.  It does not get any simpler.  Our goal is to be a partner with you to help you with your needs.  Contact us if there is some special programming requirements that you may want.  We can probably do it.\u003cbr\u003e\u003cbr\u003eThis is the first in a series of products we are working on to stamp out theft. Try our EZ-Lock system and save yourself a lot of grief when your machine goes missing.  Check with your insurance company.  You may be able to receive a discount for using a passive disarming system on your machine. If you self-insure your machines, this product could easily pay for itself with one prevented theft! Your insurance provider may give a discount for having EZ-Lock installed.\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Skid Steer Solutions","offers":[{"title":"Default Title","offer_id":13894211015,"sku":"888-DSS-001","price":333.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/EZ-Lock-Ditigal-Remote-Anti-Theft-System.jpg?v=1683676488"},{"product_id":"heated-seat-kit","title":"Seat Warmer Kit | Skid Steers | Tractors | Excavators | SXSs","description":"\u003ch2\u003eSeat Warmer Kit for Skid Steers and Equipment\u003c\/h2\u003e\n\u003cp\u003eAdd heat at the seat without replacing the whole suspension or operator chair. This kit uses separate carbon-fiber pads for the seat bottom and backrest, with high and low settings controlled by a compact illuminated switch.\u003c\/p\u003e\n\u003cp\u003eIt is a practical cold-weather addition for many skid steers, compact track loaders, excavators, tractors, UTVs, and similar equipment, but fit still depends on the seat. Each pad measures 9 by 18 inches and is about 1\/32 inch thick. Measure the usable bottom and backrest areas and plan the wire path before taking the seat apart.\u003c\/p\u003e\n\u003ch3\u003eHeat settings and electrical load\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh setting: approximately 120–125°F.\u003c\/li\u003e\n\u003cli\u003eLow setting: approximately 110–115°F.\u003c\/li\u003e\n\u003cli\u003eTwo pads at 24–30 watts each, or 48–60 watts per seat.\u003c\/li\u003e\n\u003cli\u003eCurrent draw: approximately 4 amps on low and 5 amps on high per seat.\u003c\/li\u003e\n\u003cli\u003eWarm-up begins within the first two minutes when started on high.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe prewired round switch provides High\/Off\/Low control and uses two-color illumination. The switch requires a 3\/4-inch mounting opening, so choose a reachable location with clearance behind the panel.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne 9 x 18-inch carbon-fiber backrest pad.\u003c\/li\u003e\n\u003cli\u003eOne 9 x 18-inch carbon-fiber seat-bottom pad.\u003c\/li\u003e\n\u003cli\u003ePrewired dual-temperature illuminated switch.\u003c\/li\u003e\n\u003cli\u003ePower cable with inline fuse.\u003c\/li\u003e\n\u003cli\u003eTwo rows of double-stick tape, quick-lock cable ties, and adhesive insulating tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a direct-wire kit. It connects to an appropriate power source and ground; it does not come with a USB or cigarette-lighter plug. Confirm machine voltage, available circuit capacity, fuse placement, wire protection, and safe routing with a qualified installer before connection.\u003c\/p\u003e\n\u003ch3\u003eFit and installation planning\u003c\/h3\u003e\n\u003cp\u003eCan both pads lie flat inside the usable seat area? Is there room to route wiring away from suspension movement, sharp edges, and pinch points? Can the switch be mounted where it will not be bumped during entry? Answer those questions before installing the adhesive-backed pads.\u003c\/p\u003e\n\u003cp\u003eDo not cut or sharply fold a carbon-fiber heating pad. Keep wiring clear of the seat suspension and operator-restraint hardware. For other cold-weather cab additions, browse \u003ca href=\"\/en-ca\/collections\/skid-steer-accessories\"\u003eskid steer accessories\u003c\/a\u003e and \u003ca href=\"\/en-ca\/collections\/electrical-parts\"\u003eequipment electrical parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this plug into a cigarette-lighter socket?\u003c\/h4\u003e\n\u003cp\u003eNo plug is supplied. SSC's product answer specifies a direct connection to power and ground with an inline fuse.\u003c\/p\u003e\n\u003ch4\u003eHow large are the heating pads?\u003c\/h4\u003e\n\u003cp\u003eBoth the bottom and backrest pads measure 9 by 18 inches.\u003c\/p\u003e\n\u003ch4\u003eHow do I change the temperature?\u003c\/h4\u003e\n\u003cp\u003eUse the supplied High\/Off\/Low switch. High is listed at 120–125°F and low at 110–115°F.\u003c\/p\u003e","brand":"SkidSteerCabs.com","offers":[{"title":"Default Title","offer_id":36424013063,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/files\/Seat-Warmer-Kit-Skid-Steers-Tractors-Excavators-SXSs.jpg?v=1736898895"},{"product_id":"led-light-bar","title":"LED Light Bar | For Skid Steer Excavator Tractor SXS","description":"\u003ch2\u003e22-Inch 120W LED Work Light Bar\u003c\/h2\u003e\n\u003cp\u003eAdd forward or rear work lighting to a skid steer, excavator, tractor, side-by-side, dozer, backhoe, or other 12V\/24V equipment. This straight 22-inch bar combines spot and flood optics, giving the operator a concentrated view farther ahead plus useful spread around the work area.\u003c\/p\u003e\n\u003cp\u003eThe light uses forty 3-watt LEDs for a 120-watt rated output and operates on 10-30V DC systems. A die-cast aluminum housing manages heat and stands up to normal off-road equipment use. The compact 558 x 50 x 65 mm body fits many roofline, crossbar, bumper, and rear-work-light locations when the machine has enough clearance.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 120W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLED array:\u003c\/strong\u003e 40 x 3W high-intensity LEDs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 10-30V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBeam pattern:\u003c\/strong\u003e spot and flood combination\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall size:\u003c\/strong\u003e 558 x 50 x 65 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e die-cast aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e adjustable bracket supplied with the light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePlan the Electrical Installation\u003c\/h3\u003e\n\u003cp\u003eCheck the machine's charging capacity, available circuit protection, mounting surface, and cable route before installation. A 120W lamp can draw about 10 amps on a nominal 12V system before normal voltage and efficiency differences are considered. Use correctly sized wire, an appropriate fuse, a relay when required, protected connections, and a switch rated for the circuit.\u003c\/p\u003e\n\u003cp\u003eA wiring harness is not identified as part of this listing. Inspect the package contents before beginning the installation and source the machine-side wiring components separately when needed. Keep wiring away from exhaust components, articulation points, lift arms, sharp edges, and areas where debris collects.\u003c\/p\u003e\n\u003ch3\u003eMounting and Aim\u003c\/h3\u003e\n\u003cp\u003eChoose a rigid location that does not obstruct cab entry, door travel, cooling airflow, or the operator's sightline. Tighten the mounting hardware after setting the initial beam angle, then test the machine through its normal range of movement. Aim the light low enough to illuminate the work zone without reflecting off the attachment or blinding nearby operators.\u003c\/p\u003e\n\u003cp\u003eUse this as an off-road work light unless the installation and local rules specifically permit road use. Browse more \u003ca href=\"\/en-ca\/collections\/skid-steer-accessories\"\u003eskid-steer accessories\u003c\/a\u003e for machine lighting and cab equipment.\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work on a 24V machine?\u003c\/strong\u003e Yes, the listed operating range is 10-30V DC, but the installation still needs proper wiring and circuit protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a wiring harness included?\u003c\/strong\u003e The current listing identifies the light and mounting bracket, not a machine-side harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should I mount it?\u003c\/strong\u003e Use a solid location with clearance for doors, lift arms, attachments, and cable routing, then aim it at the actual work zone.\u003c\/p\u003e","brand":"SkidSteerCabs.com","offers":[{"title":"Default Title","offer_id":29154547499085,"sku":"PH-LED01-01","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/files\/LED-Light-Bar-For-Skid-Steer-Excavator-Tractor-SXS.jpg?v=1736898951"}],"url":"https:\/\/www.skidsteercabs.com\/en-ca\/collections\/excavator-accessories.oembed","provider":"SkidSteerCabs.com","version":"1.0","type":"link"}