{"product_id":"bobcat-f-series-cab-enclosure-pro-series","title":"BOBCAT CAB ENCLOSURE | PRO-SERIES | C\/F-SERIES MODELS","description":"\u003ch2\u003eBobcat C\/F-Series Pro-Series Cab Enclosure\u003c\/h2\u003e\n\u003cp\u003eClose in an open older Bobcat with a formed 1\/2-inch Lexan polycarbonate front door, locking hardware, seals, and the parts needed for a full retrofit. The Pro-Series kit adds a hard barrier against cold wind, precipitation, brush, and loose jobsite material without depending on a complete factory door system.\u003c\/p\u003e\n\u003cp\u003eOrder Door Only for the front door and mounting package, or select Door + Side Windows to add fitted stationary panels. You must also choose the loader's bucket-cylinder layout: one cylinder centered behind the bucket or two cylinders, one on each side.\u003c\/p\u003e\n\u003ch3\u003eC-Series and F-Series fitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eC-Series:\u003c\/strong\u003e 542B, 543, 543B, and 743.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF-Series:\u003c\/strong\u003e 553, 743, 751, 753, 763, 773, 853, 863, and 873. SSC's fitment record identifies these as the 1991–1999 F-Series machines.\u003c\/p\u003e\n\u003cp\u003eThe 743 appears in both groups, and older machines may have cab or lighting differences that are not obvious from a model number. Check the plate, count the bucket cylinders, and compare the cab opening with the product photos. Has the ROPS been modified? Is old door hardware still installed? Send photos through our \u003ca href=\"\/en-ca\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e when anything is unclear.\u003c\/p\u003e\n\u003ch3\u003eWhat comes with the selected configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFormed 1\/2-inch Lexan polycarbonate front door.\u003c\/li\u003e\n\u003cli\u003eLocking exterior handle and keys, interior pull, hinges, latch, striker, thresholds, perimeter seals, fasteners, and related mounting hardware.\u003c\/li\u003e\n\u003cli\u003eStationary polycarbonate side panels, seals, and mounting hardware with Door + Side Windows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe side panels do not slide. A roof panel and rear window are not included. C\/F rear-window openings have serial-number breaks, so measure the opening rather than assuming one rear panel fits every loader. Check SSC's \u003ca href=\"\/en-ca\/collections\/replacement-skid-steer-windows-polycarbonate\"\u003epolycarbonate skid steer windows\u003c\/a\u003e for model-specific and custom-order paths.\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMost C\/F-Series installations can use the original factory hinge location for door placement. A tap tool is supplied for holes that still need to be prepared, and the new striker mounts to the ROPS for latch alignment. Plan to remove conflicting hardware, square the door, set the hinges, and adjust the striker before tightening the seals and thresholds.\u003c\/p\u003e\n\u003cp\u003eMany installations take roughly one to two hours once the cab is prepared, though corrosion, old holes, and prior modifications can add time. Review the \u003ca href=\"\/en-ca\/pages\/pro-series-cab-enclosure-installation-guide\"\u003ePro-Series installation guide\u003c\/a\u003e before starting.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhy do I have to choose a bucket-cylinder layout?\u003c\/h4\u003e\n\u003cp\u003eThe one-center-cylinder and two-side-cylinder loaders use different cab geometry. Choose what is physically on the machine.\u003c\/p\u003e\n\u003ch4\u003eWill the side windows open?\u003c\/h4\u003e\n\u003cp\u003eNo. The optional panels are stationary and bolt into place.\u003c\/p\u003e\n\u003ch4\u003eIs this an OEM replacement door?\u003c\/h4\u003e\n\u003cp\u003eNo. It is an aftermarket retrofit kit for an open cab. Contact SSC before ordering when factory framing, sensors, wiring, or door hardware remains.\u003c\/p\u003e","brand":"Thermfast Industries","offers":[{"title":"1 (center of bucket) \/ Door Only Kit","offer_id":31266470821965,"sku":"ENC-BC-542B-F1-A","price":1965.0,"currency_code":"CAD","in_stock":true},{"title":"1 (center of bucket) \/ Door + Side Windows","offer_id":31266496577613,"sku":"ENC-BC-542B-F1-B","price":2529.0,"currency_code":"CAD","in_stock":true},{"title":"2 (1 on each side of bucket) \/ Door Only Kit","offer_id":12220444541005,"sku":"ENC-BC-873-F2-A","price":1965.0,"currency_code":"CAD","in_stock":true},{"title":"2 (1 on each side of bucket) \/ Door + Side Windows","offer_id":12220533997645,"sku":"ENC-BC-873-F2-B","price":2529.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/BOBCAT-CAB-ENCLOSURE-PRO-SERIES-CF-SERIES-MODELS.jpg?v=1683676563","url":"https:\/\/www.skidsteercabs.com\/en-ca\/products\/bobcat-f-series-cab-enclosure-pro-series","provider":"SkidSteerCabs.com","version":"1.0","type":"link"}