{"product_id":"bobcat-g-series-cab-enclosure-pro-series","title":"BOBCAT CAB ENCLOSURE | PRO-SERIES | G-SERIES MODELS","description":"\u003ch2\u003eBobcat G-Series Pro-Series Cab Enclosure\u003c\/h2\u003e\n\u003cp\u003eClose in an open Bobcat G-Series loader with a 1\/2-inch Lexan polycarbonate front door, locking hardware, weather seals, and the mounting parts needed for a complete retrofit. This kit gives working machines a hard front barrier against wind, precipitation, brush, and jobsite debris without requiring an intact factory door system.\u003c\/p\u003e\n\u003cp\u003eTwo choices matter before you order: the loader's bucket-cylinder layout and the amount of cab coverage. Select one center bucket cylinder or two side bucket cylinders, then choose Door Only or Door + Side Windows. Those options determine the geometry and parts SSC ships.\u003c\/p\u003e\n\u003ch3\u003eConfirm the G-Series cab layout\u003c\/h3\u003e\n\u003cp\u003eSupported G-Series records include the Bobcat 763; S150, S160, S175, S180, S200, S220, S250, S300, and S320 skid steers; T110, T140, T180, T190, T200, T250, T300, and T320 compact track loaders; and A300 and A320 all-wheel steer loaders.\u003c\/p\u003e\n\u003cp\u003eOlder Bobcat naming and cab changes can make model-only ordering unreliable. SSC has also supplied this product for a 773G after photo confirmation. If your plate reads 753 or 773, or if the model is not in the list above, do not guess from the product photos. Send the model plate, front cab opening, hinges, and loader-arm area through our \u003ca href=\"\/en-ca\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e so SSC can match the cylinder layout and cab shape.\u003c\/p\u003e\n\u003ch3\u003eDoor Only or Door + Side Windows\u003c\/h3\u003e\n\u003cp\u003eThe Door Only Kit contains the formed front door and its installation package. Door + Side Windows adds matching stationary polycarbonate side panels with seals and mounting hardware. The side windows do not slide. Neither configuration includes a roof panel or rear window.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFormed 1\/2-inch Lexan polycarbonate front door.\u003c\/li\u003e\n\u003cli\u003eLocking exterior handle and keys, interior pull, hinges, latch, striker, seals, thresholds, fasteners, and related hardware.\u003c\/li\u003e\n\u003cli\u003eStationary side panels when the Door + Side Windows option is selected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare the other \u003ca href=\"\/en-ca\/collections\/bobcat-enclosure-systems\"\u003eBobcat enclosure systems\u003c\/a\u003e if the machine is C\/F-, M-, or R-Series rather than G-Series.\u003c\/p\u003e\n\u003ch3\u003eInstallation and warranty\u003c\/h3\u003e\n\u003cp\u003eMost G-Series installations use the factory hinge location, but the supplied striker still mounts to the ROPS and some machines require drilling or tapping. Remove abandoned hardware, square the door in the opening, and set the latch alignment before final tightening. The \u003ca href=\"\/en-ca\/pages\/pro-series-cab-enclosure-installation-guide\"\u003ePro-Series installation guide\u003c\/a\u003e covers the general preparation and adjustment sequence.\u003c\/p\u003e\n\u003cp\u003eThe front polycarbonate door carries SSC's limited lifetime breakage warranty for the original owner during normal, non-abusive use. Hardware and optional equipment carry three months of coverage, subject to the published exclusions and return terms.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhy does the bucket-cylinder count matter?\u003c\/h4\u003e\n\u003cp\u003eThe one-center-cylinder and two-side-cylinder machines use different cab geometry. Match the option to the loader in front of you.\u003c\/p\u003e\n\u003ch4\u003eWill this replace an existing Bobcat factory door?\u003c\/h4\u003e\n\u003cp\u003eThis is a full aftermarket retrofit for an open cab. Contact SSC first when factory door hardware, wiring, sensors, or a factory frame remains on the machine.\u003c\/p\u003e\n\u003ch4\u003eAre the side windows removable?\u003c\/h4\u003e\n\u003cp\u003eThey are stationary panels, but they can be unbolted when seasonal operation calls for an open cab.\u003c\/p\u003e","brand":"Thermfast Industries","offers":[{"title":"1 (center of bucket) \/ Door Only Kit","offer_id":12220555984973,"sku":"ENC-BC-753-G1-A","price":2106.0,"currency_code":"CAD","in_stock":true},{"title":"1 (center of bucket) \/ Door + Side Windows","offer_id":12220566732877,"sku":"ENC-BC-753-G1-B","price":2712.0,"currency_code":"CAD","in_stock":true},{"title":"2 (1 on each side of bucket) \/ Door Only Kit","offer_id":12220556181581,"sku":"ENC-BC-773-G2-A","price":2106.0,"currency_code":"CAD","in_stock":true},{"title":"2 (1 on each side of bucket) \/ Door + Side Windows","offer_id":12220566798413,"sku":"ENC-BC-773-G2-B","price":2712.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/BOBCAT-CAB-ENCLOSURE-PRO-SERIES-G-SERIES-MODELS.jpg?v=1683676579","url":"https:\/\/www.skidsteercabs.com\/en-ca\/products\/bobcat-g-series-cab-enclosure-pro-series","provider":"SkidSteerCabs.com","version":"1.0","type":"link"}