{"product_id":"heavy-duty-earth-auger-teeth-eterra","title":"HEAVY DUTY EARTH AUGER TEETH | ETERRA","description":"\u003ch2\u003eEterra Heavy-Duty Earth Auger Replacement Tooth\u003c\/h2\u003e\n\u003cp\u003eReplace a worn standard dirt tooth on a compatible Eterra earth auger without buying a complete bit. This Shock Lock tooth kit is built for routine drilling in dirt and mixed ground where a standard drop-forged cutting tooth is the right setup.\u003c\/p\u003e\n\u003cp\u003eThe SSC product SKU is \u003cstrong\u003eET-02D000-P001-10\u003c\/strong\u003e. Check the tooth style and holder on your auger before ordering. Eterra offers several bit sizes and optional cutting components, so matching the wear part matters more than matching the auger diameter alone.\u003c\/p\u003e\n\n\u003ch3\u003eWhat comes in the kit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 35 Series Shock Lock dirt tooth.\u003c\/li\u003e\n  \u003cli\u003eOne locking pin.\u003c\/li\u003e\n  \u003cli\u003eOne shock-absorbing rubber insert.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe replacement tooth measures approximately \u003cstrong\u003e3.5 x 1.62 in.\u003c\/strong\u003e This listing is for one tooth kit, not an auger bit, pilot point, fishtail, drive, or full set of teeth.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and ordering checks\u003c\/h3\u003e\n\u003cp\u003eThis kit cross-references Eterra number \u003cstrong\u003e02D000-P001-10\u003c\/strong\u003e and is intended for a compatible Shock Lock tooth holder. Compare the number, tooth profile, pin position, and holder condition with the part being removed. If those details do not match, stop and confirm the correct wear part before checkout.\u003c\/p\u003e\n\u003cp\u003eNeed a complete bit instead? SSC also carries Eterra Earth Auger Bits in multiple diameters with a 2-inch hex connection and optional cutting components. \u003ca href=\"\/en-ca\/pages\/contact-us\"\u003eContact SSC\u003c\/a\u003e to match the bit to your drive and planned hole size.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePark the machine on stable ground, shut it down, and support the auger so it cannot roll or drop.\u003c\/li\u003e\n  \u003cli\u003eRemove the worn pin, tooth, and rubber insert, then inspect the holder for distortion or heavy wear.\u003c\/li\u003e\n  \u003cli\u003eSeat the new rubber insert and tooth fully before installing the locking pin.\u003c\/li\u003e\n  \u003cli\u003eFollow the auger manufacturer's service instructions and keep hands clear of unsupported equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this the tungsten-carbide tooth?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the standard dirt-tooth kit. Choose the tungsten-carbide listing when your compatible Eterra setup needs the harder-wearing tooth option for abrasive ground.\u003c\/p\u003e\n\u003ch4\u003eDoes one order replace every tooth on my bit?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing supplies one tooth, one pin, and one rubber insert. Count the teeth you plan to replace before setting the quantity.\u003c\/p\u003e\n\u003ch4\u003eWhat should I verify before ordering?\u003c\/h4\u003e\n\u003cp\u003eCompare the part number, Shock Lock holder, tooth profile, and pin location. Send photos of the existing tooth and holder when the identification is unclear.\u003c\/p\u003e","brand":"Eterra","offers":[{"title":"Default Title","offer_id":39349114077261,"sku":"ET-02D000-P001-10","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/6548\/products\/HEAVY-DUTY-EARTH-AUGER-TEETH-ETERRA.jpg?v=1683677148","url":"https:\/\/www.skidsteercabs.com\/en-ca\/products\/heavy-duty-earth-auger-teeth-eterra","provider":"SkidSteerCabs.com","version":"1.0","type":"link"}