Eterra Skid Steer Tire Studs for Rubber Tires and Tracks.
Installation
Use a low torque driver at fairly slow speed
Screw the stud in until the washer (underside) makes contact with the rubber visually
Go no more that 1/2 turn past that point.
We recommend using 30mm or 1" studs for skid steer or compact loader installations because of the amount of tearing action the machines can produce when turning. It is your responsibility to measure and order the correct length to insure they cannot pull out. It they are too short, they will pull out.
Basic Installation Rules
Never fit a stud that is too long for the tread depth, i.e. an 18 mm stud requires a 17 mm tread depth. 3 mm of the stud should be raised above the tire surface, which gives a margin of 2 mm down to the cord. The thickness of the cord varies between 4 and 20 mm depending on the tire type. To achieve optimal results, count the number of contact patches on the tire and make a strategy for fitting the studs.