SKID STEER REPLACEMENT COLD ROLLED TINES | HAUGEN
Shipping Rates & Policies
LTL Freight Shipping
- Larger items ship via LTL freight
- All LTL freight charges are estimates
- Call or text us at (240) 301-1225 to get shipping cost confirmation before ordering
- Shipping costs will be reviewed prior to shipping to ensure accuracy
- We will contact you if any shipping cost changes are required
- Delivery typically within 5-10 business days
- Delivery appointment required
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
Haugen Cold-Rolled Replacement Bale Spear Tines
Replace a worn or damaged cold-rolled tine on a compatible Haugen bale spear without replacing the full attachment. Four 1045 cold-rolled options are available, each with its own length, diameter, weight, and model number.
These are replacement parts for Haugen bale-spear configurations that use the matching cold-rolled tine. They are not presented as universal forks or as substitutes for forged CONUS tines.
Choose by model and dimensions
| Model | Length | Diameter | Weight |
|---|---|---|---|
| CR-24 | 24 in. | 1.50 in. | 9 lb |
| CR-34 | 34 in. | 1.75 in. | 24 lb |
| CR-42 | 42 in. | 1.75 in. | 29 lb |
| CR-48 | 48 in. | 2.00 in. | 42 lb |
Match the stamped model when available, then verify length and diameter. Two tines can share a diameter without sharing the same length or attachment position.
What is included
The selected replacement tine and its supplied hardware are included. The bale-spear frame, additional tines, backrest, and attachment mounting plate are not included. Quantity is one unless the cart explicitly shows otherwise.
Inspect the mounting bore, retaining points, and surrounding frame before ordering. A damaged frame or elongated mounting hole should be repaired before a new tine is installed.
Replacement checks
Support the attachment on the ground and remove stored hydraulic energy before service. Compare the removed tine with the selected model, install the supplied hardware in the original orientation, and torque it to the attachment manufacturer's service guidance. Recheck the hardware after the first work cycle.
Browse other Haugen attachments and parts when the existing spear uses a forged or different mounting system.
Common questions
Can I choose a tine by length alone?
No. Match the CR model, length, diameter, and mounting arrangement before ordering.
Is the attachment frame included?
No. This listing supplies one selected replacement tine with its hardware.
Will these replace forged CONUS tines?
Not by default. These are 1045 cold-rolled tines for compatible Haugen bale-spear setups.
Similar Items You Might Like
People Who Bought This Item Also Bought
Questions & Answers
Have a Question?
Be the first to ask a question about this.