12 Volt Cab Heater | Skid Steer UTV Tractor
Shipping Rates & Policies
Standard Shipping
- Most items ship parcel post via UPS, but not always
- Most items ship within 2 days, but not always
- Shipping costs calculated at checkout based on your location
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
12 Volt Cab Heater and Fan for Compact Equipment
This compact ceramic heater is intended for 12-volt skid steers, excavators, UTVs, and compact tractors. It connects directly to the machine battery and delivers 300 watts of heat. Switch to fan mode when you want air movement without heat, then aim the airflow with the swivel base.
What is included
- 12-volt ceramic heater and fan with swivel base
- 15-foot, 12-gauge power cord with ring terminals
- Installation hardware
Electrical and size specifications
- Electrical connection: direct to a 12-volt battery
- Heater output: 300 watts
- Circuit protection: install a 30-amp inline fuse on the red positive wire, or use a vehicle fuse-panel connection capable of 30 amps, following the owner's guide and the machine manufacturer's requirements
- Dimensions: 6 x 8 x 6 inches
- Product weight: 2.95 pounds
Check your machine before ordering
Confirm that your machine has a 12-volt electrical system, a suitable mounting location, a protected cable route, and the required circuit capacity. The heater uses a direct battery connection; it does not plug into a dashboard accessory socket. Use it only while the machine is running to avoid draining the battery, and treat it as supplemental heat rather than a replacement for the machine's primary heater.
Common questions
Which machines is this heater sold for?
It is sold for 12-volt skid steers, excavators, UTVs, and compact tractors. Confirm the electrical system and mounting space on your machine before ordering.
Can I use the fan without heat?
Yes. The unit has heat and fan modes with adjustable fan speed.
How is it powered?
The included 15-foot, 12-gauge cord connects directly to the battery with ring terminals. The owner's guide requires a 30-amp inline fuse on the positive wire, or a 30-amp-capable vehicle fuse-panel connection.
Working on cab visibility too? See the electric wiper kit and CM-40 wired backup camera.
Similar Items You Might Like
People Who Bought This Item Also Bought
Videos for this Product
Questions & Answers
Have a Question?
-
How many btu's is this heater
Hi - this heater is rated at 300 watts, and roughly 1,000 BTUs / hour.
-
Bought a small heater from O'Reiley's last yr and was very disappointed in it could hardly feel the heat , is this heater able to keep inside of bobcat cab warm ??
I've had a few customers tell me they work really well, but at the end of the day - it is still a small electric heater. I would not expect it to perform like your car heater or a factory equipment heater, but I do think it will help to provide some level of additional heat.
I do sell a TON of these heaters, and I don't think we've ever had any complaints about htem not doing a good enough job.
I hope this helps!
Thanks,
Brian -
Would this work in an electric Hyster forklift?
As long as you can tap into a 12 volt power source, it will work great!