KUBOTA SVL SKID STEER CAB ENCLOSURE | PRO-SERIES
Shipping Rates & Policies
Standard Shipping
- Most items ship parcel post via UPS, but not always
- Most items ship within 2 days, but not always
- Shipping costs calculated at checkout based on your location
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
Kubota SVL Pro-Series Cab Enclosure
Close in an open Kubota SVL operator station with an SSC Pro-Series swing-out polycarbonate door, or add stationary side windows for broader weather coverage. The four product choices combine Door Only or Door + Side Windows with either an included door frame or reuse of a compatible frame.
Covered SVL models
This kit is listed for Kubota SVL65, SVL65-2, SVL75, SVL75-2, SVL90, SVL90-2, SVL95, SVL95-2, SVL97, and SVL97-2. It does not fit the SVL97-3. Confirm the full model suffix and current cab configuration before checkout. If the machine has been modified or the model plate is unclear, send SSC photos of the plate, front opening, and existing door hardware.
Choose the kit and frame correctly
Door Only Kit includes the 1/2-inch polycarbonate front door and its installation hardware. Door + Side Windows adds removable stationary polycarbonate side panels and their seal hardware. Choose Include frame for an open-station machine with no usable door frame. Choose Exclude frame only when the compatible Pro-Series or factory structure needed by the selected installation is already present and serviceable.
Included hardware and installation
The selected kit includes the lockable exterior handle and coded keys, latch and release components, interior pull handle, striker hardware, hinges, door seal, thresholds, fasteners, and the frame or side-window components selected above. Top and rear windows, heater, wiper, lighting, and camera are not included unless ordered separately. This is an aftermarket retrofit, not a Kubota OEM door system. Drilling, tapping, hinge alignment, latch adjustment, and removal of conflicting hardware may be required. Read the Pro-Series installation guide before the machine is taken apart.
Questions buyers ask
Does it fit an SVL75-2? Yes, with the kit configuration and frame choice matched to the existing cab.
Does it fit an SVL97-3? No. The current swing-out Pro-Series kit stops at the SVL97-2.
Do the side windows slide? No. They are stationary panels that can be unbolted for warm-weather operation.
The front polycarbonate panel carries SSC’s limited lifetime breakage warranty for the original owner during normal, non-abusive use; hardware and optional equipment have separate limited coverage and exclusions. Browse more Kubota enclosure systems or request a configuration review.
People Who Bought This Item Also Bought
Questions & Answers
Have a Question?
-
Do the side windows slide open and close?
Hi! Our side windows are stationary, and do not open or slide. However, if you are wanting to remove them in summer, they do just bolt on and off!
-
Will this fit my 2021 svl75-2
Good Evening!
Yes, it will fit your SVL75-2! If you have the original roll up door still installed, then you would NOT need our frame...our door will install over your existing roll up door and swing open, that way you have the original roll up door, and or safety door at the same time, both useable! If you have an open station, then you would need our frame, and once that was installed the swing open door would go on that. Please let me know if you have any more questions! You can reply to this email, or call/text my work cell is 240-301-1225.
Thanks,
Nathan -
Will this kit instal a door on a 75-3 unit
Good Morning,
This will not fit a -3 unit, currently we can only replace the OEM glass for the roll up doors with poly, we don't have the swing open kits yet. I'll put you on our wish list, and reach out if we do get them!
Thanks,
Nathan