BOBCAT SKID LOADER MIRROR KIT | 081415
Shipping Rates & Policies
Standard Shipping
- Most items ship parcel post via UPS, but not always
- Most items ship within 2 days, but not always
- Shipping costs calculated at checkout based on your location
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
Bobcat Skid Loader Mirror Kit 081415
Add rear and side visibility to a compatible Bobcat M- or G-Series skid loader with mirror kit 081415. The SSC SKU is D081415. The package includes a pair of rectangular mirrors, two mounting arms, and the four bolts used to attach the arms at suitable cab mounting points.
This kit is listed for Bobcat M- and G-Series loaders, but cab structures and existing holes can vary by model and configuration. Check the machine model, cab layout, mounting surface, and available clearance before ordering.
Kit contents
- Two 7 x 12 in. mirrors.
- Two skid-loader mirror arms.
- The four 3/8-16 x 1 in. mounting bolts.
- One left/right mirror-kit package.
SSC records a 14 x 14 x 8 in. package size. The mirrors and arms are supplied as one kit; replacement cab panels, brackets for altered cabs, and machine-specific drilling templates are not listed as included.
Fitment checks
- Read the complete Bobcat model and serial number from the machine plate.
- Inspect both cab mounting areas for flat, sound metal and adequate bolt clearance.
- Confirm that the 7 x 12 in. mirror size will clear the door, lift arms, and nearby accessories through their full travel.
- Compare the supplied arm layout with the cab before drilling or tightening hardware.
Do not identify this kit from the 081415 reference alone if the machine is an excavator or wheel loader. This SSC offer is specifically listed for Bobcat M- and G-Series skid loaders.
Mounting and adjustment
Park the machine on level ground, lower the lift arms and attachment, stop the engine, and follow the Bobcat service procedure before working around the cab. Position each arm where the operator can see the needed area without blocking the door or forward view. Tighten the mounting hardware evenly, then move the door and lift arms through their normal range to check clearance.
Set the final mirror angle from the operator's seat. Recheck the fasteners after the first work cycle and as part of routine machine inspection.
Frequently asked questions
How many mirrors are included?
The kit includes two 7 x 12 in. mirrors and two mounting arms.
Does this fit every Bobcat loader?
No. It is listed for Bobcat M- and G-Series skid loaders. Confirm the exact cab and mounting points before ordering.
What should I send SSC for a fitment review?
Send the model, serial number, full cab photos, and close photos of both proposed mounting areas through the SSC contact page.
Similar Items You Might Like
People Who Bought This Item Also Bought
Questions & Answers
Have a Question?
Be the first to ask a question about this.