CASE CAB ENCLOSURE | PRO-SERIES | 410-450 MODELS
Shipping Rates & Policies
Standard Shipping
- Most items ship parcel post via UPS, but not always
- Most items ship within 2 days, but not always
- Shipping costs calculated at checkout based on your location
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
Case 410-465 Pro-Series Cab Enclosure
Close in an open Case skid steer with a formed 1/2-inch Lexan polycarbonate front door, locking hardware, seals, and the parts needed for an aftermarket retrofit. Choose Door Only for the front assembly or Door + Side Windows for the same door with fitted stationary side panels.
The series and model group are separate ordering requirements. Match both to the machine before selecting the kit.
Current series and model choices
- Series 1 and 2: 410, 420, 430, or 440.
- Series 1 and 2: 435, 445, 450, or 465.
- Series 3: 410, 420, 430, or 440.
Those are the exact groups in SSC's current purchase options. Is the machine marked CT, or is the series missing from the model decal? Does the cab already have factory hinges, sensors, wiring, or a door frame? Send the model, series, serial number, and front-cab photos through our contact page before ordering when the layout is unclear.
Door Only or Door + Side Windows
- Formed 1/2-inch Lexan polycarbonate front door.
- Locking exterior handle and keys, interior pull, hinges, latch, striker, thresholds, perimeter seal, fasteners, and related mounting parts.
- Stationary polycarbonate side panels with their seals and mounting hardware when Door + Side Windows is selected.
The side panels do not slide. A roof panel and rear window are not included with either standard option. Compare other Case enclosure systems when the machine falls outside these three groups.
Retrofit installation
This kit is for an open cab and is not a replacement panel for intact OEM door hardware. Existing factory or aftermarket framing may need to be removed. Installation requires locating and drilling hinge holes and may require additional holes for the thresholds and striker; the specified drill and tap are supplied.
Dry-fit the door, align the hinges, and adjust the striker before final tightening. Check that the latch closes without twisting the panel and that the seal contacts the opening evenly. Review the Pro-Series installation guide before starting.
Frequently asked questions
Does Series 3 use the same option as Series 1 or 2?
No. Series 3 has its own 410/420/430/440 selection.
Do the optional side windows open?
No. Door + Side Windows adds stationary panels that bolt into place.
Can the kit reuse an OEM door frame?
Do not assume so. This retrofit is intended for an open cab; send photos first if factory door components remain.
