KUBOTA PINCH BOLT LOADER MIRROR KIT - FULL | M-434-764
Shipping Rates & Policies
Standard Shipping
- Most items ship parcel post via UPS, but not always
- Most items ship within 2 days, but not always
- Shipping costs calculated at checkout based on your location
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
Full Pinch-Bolt Loader Mirror Kit M-434-764
Add a mirror on each side of a compatible Kubota loader with the full M-434-764 pinch-bolt kit. The brackets clamp to suitable plate edges, which avoids treating the package as a model-specific factory mirror assembly.
Check the mounting plate first
Each 5-inch steel mount is listed for a plate no more than 0.3 in. thick. Inspect both sides of the loader for flat, solid clamping locations with room for the bracket, bolt, washers, and locking nut. Paint buildup, curved plate, reinforcement ribs, hoses, or a plate thicker than the stated limit can prevent the clamp from seating correctly. This kit is marketed for Kubota loaders, but fit is controlled by the actual plate geometry rather than a published model list.
What the full kit includes
The package contains two 7 x 12 in. mirrors, two custom pinch-bolt brackets, bolts, washers, and locking nuts. “Full” means a two-mirror package. SSC also lists a half kit for a single side, so confirm the quantity before checkout. This is an aftermarket mirror system, not an OEM Kubota mirror kit.
Mount for clearance and a useful view
Place each clamp where the mirror remains clear of loader-arm travel, hydraulic lines, the hood, cab door, and nearby attachments. Tighten the bracket squarely against the plate without deforming the mounting surface. Set the mirror angles from the normal operator position, then cycle the loader slowly while a spotter checks both sides. Recheck bolt torque after the first operating period. Mirrors supplement direct observation and the loader operator’s manual; they do not remove blind spots.
Questions buyers ask
How many mirrors are included? The full kit includes two mirrors and two brackets.
Will it fit any Kubota loader? No model-wide claim is made. Both mounting plates must be 0.3 in. thick or less and provide suitable clamp locations.
Do I need to drill the loader? The pinch-bolt design clamps to the plate, but the machine must still be inspected for a safe mounting location.
Browse more Kubota parts or send SSC mounting-area photos.
Confirm fitment before ordering
A machine model listed on this page does not, by itself, guarantee fitment. Before ordering, use your machine serial number to confirm the required OEM part number through the manufacturer or dealer, the applicable owner's or parts manual, or an authoritative OEM parts catalog. Match that OEM number and the existing component or assembly configuration—including the door or window configuration where applicable—to this listing.
If SSC correctly ships the item, SKU, and variant you selected, but the selection is not correct for your machine, the order is not eligible for return, exchange, refund, or credit, and SSC will not cover any costs to correct the selection. If SSC ships a different item than you ordered, we will make it right at our expense.
If you are uncertain, contact SSC before ordering with the machine make, model, serial number, current OEM part number if available, and clear photos. Review our Returns and Refunds Policy.
Similar Items You Might Like
People Who Bought This Item Also Bought
Questions & Answers
Have a Question?
Be the first to ask a question about this.