BOBCAT CAB ENCLOSURE | PRO-SERIES | C/F-SERIES MODELS
Shipping Rates & Policies
Standard Shipping
- Most items ship parcel post via UPS, but not always
- Most items ship within 2 days, but not always
- Shipping costs calculated at checkout based on your location
Tip: Log in for more accurate shipping estimates using your saved address.
The delivery date is for reference only and may be adjusted according to the delivery address. Please refer to the actual delivery time.
Product Description
Bobcat C/F-Series Pro-Series Cab Enclosure Kit
Upgrade open Bobcat C/F-Series machines into more usable, weather-ready operator stations with an SSC Pro-Series enclosure kit. Choose the Door Only Kit when you need the front polycarbonate door and mounting hardware, or choose Door + Side Windows when you want the front door plus matching side windows for fuller coverage.
This listing is for the machine family shown below. If your cab has been modified, if it already has OEM door hardware, or if you are unsure which model or series you have, contact us before ordering so we can help verify the correct kit.
Why operators choose this kit
- Impact-resistant front door: 1/2 in Lexan polycarbonate is built for brush, debris, weather, and demanding jobsites while maintaining clear forward visibility.
- Weather-ready cab coverage: bulb-seal gasket, latch hardware, striker, and threshold components help close the operator station against wind, rain, snow, dust, and jobsite debris.
- Configured to your machine: select the kit and fitment options that match the cab layout before adding the enclosure to your cart.
- Complete hardware package: the selected kit includes the door hardware, lockable handle, coded keys, hinges, latch/release components, interior pull handle, striker hardware, seals, thresholds, and required fasteners.
Fitment
Designed for Bobcat C/F-Series. Confirm your model and option selections before ordering.
Covered models: Bobcat C-Series models: 542B, 543, 543B, and 743; Bobcat F-Series models: 553, 743, 751, 753, 763, 773, 853, 863, and 873.
- Select the bucket-cylinder layout that matches the loader. The one-cylinder and two-cylinder cab layouts use different fitment geometry.
- Most Bobcat C/F installs can reuse the original factory hinge location for door placement. A tap tool is included for any required drilling, and the supplied door striker still needs to be installed to the ROPS cage for proper latch alignment.
Choose the correct options
- Number of Bucket Cylinders: choose 1 (center of bucket) or 2 (1 on each side of bucket) to match the loader arm/cab layout.
What is included
- One formed 1/2 in Lexan polycarbonate front door panel cut for this machine group.
- 1/2 in bulb-seal gasket for the front door perimeter.
- High-impact exterior handle with tumbler lock and coded keys.
- Locking latch, spring-loaded release handle, stainless interior pull handle, striker bolt/plate, and universal male/female hinge hardware.
- Thresholds, mounting hardware, seals, and fasteners required for the selected kit.
- Door + Side Windows only: stationary 1/8 in polycarbonate side windows with neoprene gasket/seal hardware. The side panels can be unbolted for warm-weather operation.
Top and rear windows are not included with the standard Door Only Kit or Door + Side Windows option.
Installation notes
- This is an aftermarket retrofit enclosure, not an OEM replacement door system.
- It is not designed to reuse OEM door sensors, OEM door frames, or existing OEM door hardware unless the selected product option specifically calls for that factory frame/hinge setup.
- Prior door, frame, hinge, threshold, or aftermarket components may need to be removed before installation.
- Plan on aligning the supplied hinges, latch, striker plate, seals, and thresholds during install. Cab condition and previous hardware determine whether drilling, tapping, or additional bolting is needed.
- Most installs can be completed in about 1-2 hours with basic tools once the cab is prepared and the parts are laid out.
For a general setup sequence, fitment preparation, hinge/latch alignment steps, seal checks, and final inspection points, review our Pro-Series Cab Enclosure Installation Guide before installation.
Warranty coverage
The Lexan polycarbonate front door is covered by our limited lifetime breakage warranty for the original owner during normal, non-abusive operation. If the covered polycarbonate door panel breaks under those conditions, the warranty provides one replacement panel. Hardware and optional equipment are covered for 3 months. Warranty terms, misuse exclusions, installation damage, wear items, and return conditions apply.
Frequently asked questions
Which machines does this Pro-Series enclosure fit?
This listing is built for Bobcat C/F-Series. Review the fitment list and any model-group selectors on the page before ordering, because cab layout and prior hardware can affect fit.
Should I order Door Only or Door + Side Windows?
Choose Door Only Kit when you only need the front polycarbonate door and mounting hardware. Choose Door + Side Windows when you want the front door plus the matching side panels or side windows offered for this machine group.
What should I verify before ordering?
Use the product options above to match the exact machine setup. Current grouped options include Number of Bucket Cylinders: 1 (center of bucket), 2 (1 on each side of bucket). If the plate, cab layout, or previous hardware does not clearly match one of these choices, contact SSC before checkout.
Why does the bucket-cylinder option matter?
Bobcat C/F-Series machines use different cab geometry depending on whether the loader has one center bucket cylinder or two side bucket cylinders. Select the bucket-cylinder layout that matches your loader before adding the kit to your cart.
Can I add accessories with this enclosure?
Yes. The recommended add-ons below match the optional accessory paths commonly ordered with Pro-Series kits, including cab heat, wipers, lighting, seat comfort, and rear visibility. Select add-ons before checkout when you want them included with the order.
What warranty coverage applies?
The Lexan polycarbonate front door is covered by SSC's limited lifetime breakage warranty for the original owner during normal, non-abusive operation. Hardware and optional equipment are covered for 3 months. Warranty terms and exclusions apply.
Recommended add-ons
These are the same optional accessories available with this Pro-Series kit. Select them before adding the enclosure to your cart when you want them included with the order.
- 12 Volt Cab Heater for cold-weather cab comfort.
- Electric Wiper Kit for added visibility in rain, snow, and spray.
- LED Light Bar for improved jobsite visibility in low-light conditions.
- Seat Warmer Kit for added operator comfort in cold weather.
- CM-40 Skid Steer Backup Camera for improved rear visibility around equipment, attachments, and tight work areas.
Review our Terms of Sale / Return Policy before ordering.
People Who Bought This Item Also Bought
Questions & Answers
Have a Question?
-
Hi There - nice cabs and quite reasonably priced. I was wondering do you sell anything for a Bobcat 341D compact excavator?
Hi! Unfortunately at this time, we are only manufacturing products for skid steer loaders.
-
Is this the complete cab or just door
Hello! This kit is meant to be installed on a machine that has never had OEM kit installed, the door kit comes with the door, hinges, handle, seal, and everything else you will need to install. You can also add the side windows for slightly extra, they are stationary and come with hardware and seal!
-
What about the top
Hi Frank,
Some models may have a window in the roof for seeing the bucket when raised. If this is the case, we would need the dimensions of the area and would send the dimensions and a picture of your machine to the shop. In most cases, we can custom make a polycarbonate window for the roof too!
Thanks,
Nathan -
I have a 1993 bobcat 773, it does not have the triangular shaped headlights nor the jut out parts on the front top of cab as shown in your pictures. It is just flat across the front with 2 rectangular front lights. Do you make an enclosure to fit this?
We have 2 options for your Bobcat 773 Our kits are made for each machine. Some of the pictures on the website may differ than the actual machine. 1. Full cab enclosure system (includes front door and 2 side windows) 2. Front door only system (just includes the front door assembly) Either of the above would come with everything you need to get fully installed, including all hardware, fasteners, weather sealing gaskets, door handles, keys, hinges, etc. **Shipping is also included in the quoted price to the lower 48 states.** Our doors are made of 1/2 inch thick Lexan poly-carbonate plastic. They are nearly indestructible! In fact, we guarantee them for life under normal usage. Additionally, we also make a 12 volt windshield wiper kit and heater kit that are designed to work nicely with our kits, which you can add if you like: Give us a call to order today, or you can order online at www.skidsteercabs.com as well too.
-
DO YOU MAKE SIDE WINDOWS THAT SLIDE OPEN FOR YOUR FRONT/SIDE WINDOW KIT ON 1996 BOBCAT 751 OR ARE ALL YOUR SIDE WINDOWS STATIONARY?
Hi - all of our side windows are stationary, we do not make any sliding side windows at this time. Thank for checking in.
Brian -
need cab for 2012 Bobcat Skid Steer S570
Hi,
We make a cab for those, I believe it is listed here. https://www.skidsteercabs.com/products/extreme-duty-cab-enclosure?_pos=1&_psq=s570&_ss=e&_v=1.0&variant=12210024415309
Let me know if you have any questions!
Thanks,
Nathan
-
I have an 853 Bobcat skid. Does the window unit open and close? and does it mount to the inside or outside?
Hi - the side window units do not open or close. They are solid panels that are mounted using nuts and bolts around the perimeter. They get installed on the inside of the ROPS cage.
-
does this come with the rear window also?
The kit does not include a rear window, however we sell those as well if you need one. They are manufactured using the same durable poly-carbonate plastic material, and come as a kit which includes the factory rubber molding / gasket and safety cord. For C/F series machines, there were some serial number breaks, so I would need to ask you to measure the size of your opening and send it to us if you decide to buy the rear window kit.